When cabling stops working
Cabling is fast and inexpensive, and for most first-time clogs it is the right call. The trouble comes when the clog returns within weeks or months. That usually means the cable opened a narrow path through buildup that is still stuck to the pipe wall.
Hydro jetting pushes water at several thousand pounds per square inch through a nozzle with rear-facing jets. The jets propel the hose down the line while cutting grease and root hairs off the walls and flushing the debris toward the city main.
For many owners who start with drain cleaning, jetting is the second step when the problem keeps coming back. Jetting runs from a cleanout, and the Ohio Plumbing Code, based on the 2021 International Plumbing Code (IPC), requires accessible cleanouts on the building drain for exactly this kind of maintenance.
The camera comes first
Jetting is powerful, and that power has limits. On a cracked clay section, a separated joint or a fiber pipe that has softened, high pressure can make the damage worse. That is why the line is inspected with a camera before jetting and again after.
If the camera shows a broken pipe, jetting is not the fix. The honest answer is a repair, covered on our sewer line repair page. If the pipe is sound but coated, jetting is often the most cost-effective long-term cleaning.
Hydro jetting compared with cabling
| Cable machine | Hydro jetting | |
|---|---|---|
| What it does | Cuts a path through the clog | Scours the full pipe wall. |
| Best for | Single clogs, hair, paper | Grease, scale, fine roots, recurring clogs. |
| Risk on damaged pipe | Low | Higher, which is why the camera goes first. |
| How long results last | Often short on grease or roots | Usually longer on sound pipe. |
Kitchen lines and small commercial kitchens
Grease is the most common reason for jetting in homes. It cools on the pipe wall and builds up in layers, especially on long, flat kitchen runs through a basement. Jetting clears it back to bare pipe.
Restaurants and food businesses deal with the same problem at a larger scale and are also required to maintain grease interceptors. Our commercial plumbing page covers that work.
When jetting is the right call
Jetting requests usually come after a cable could not get through, stopped at a fixed distance, or the line clogs again every couple of years. Jetting scours grease and root mass off the pipe wall instead of punching one hole through it.
It is not the first step on every clog. A camera inspection decides whether the pipe is sound enough, because jetting a cracked clay or collapsed line can make the break worse.
Hydro jetting in Hamilton and nearby
We jet lines across ZIP codes 45011, 45013 and 45015, most often in older homes with clay laterals and in rental properties with heavy kitchen use. Rental owners near campus in Oxford use it for the same reason.
Jetting is most often needed on the long clay laterals under Prospect Hill and Lindenwald streets, and on restaurant and apartment kitchen lines downtown and along Main Street in Rossville.
What hydro jetting costs depends on
Jetting uses specialized equipment, so it costs more than cabling. These factors set the final price.
- Line length and diameter from the cleanout to the main.
- Access. A usable cleanout makes the job much faster.
- Buildup severity. Heavy grease or dense roots take more passes.
- Camera inspection before and after, priced as its own step.
- Timing. Scheduled jetting costs less than an emergency visit.
Line cleaning is maintenance and is not covered by insurance. Keep the camera footage, as it helps if you ever need to prove the condition of the line.
Want your real number? Call (513) 796-9381 and describe what you are seeing.